Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (HVAC System - Automatic) >> Repair Instructions >> Heater and Blower and Air Conditioning Control Module Replacement

Heater and Blower and Air Conditioning Control Module Replacement

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heater & Blower & Air Conditioning Control Module
GM2020214Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  2. Remove the floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Right Side .
  3. Disconnect the heater and blower and air conditioning control module electrical connectors.
1 Heater and Blower and Air Conditioning Control Module Fastener (Qty: 2)
2 Heater and Blower and Air Conditioning Control Module