Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Rear Suspension System) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Rear Suspension Adjust Link Nut at the Frame (GNC) 90 N.m + 60 degrees 66 lb ft + 60 degrees
Rear Suspension Adjust Link Nut at the Rear Wheel Hub bracket (GNC) 115 N.m + 90 degrees 85 lb ft + 90 degrees
Rear Suspension Adjust Link Nut at the Frame (GNE) 115 N.m + 90 degrees 85 lb ft + 90 degrees
Rear Suspension Adjust Link Nut at the Rear Wheel Hub Bracket (GNE) 150 N.m + 90 degrees 111 lb ft + 90 degrees
Rear Suspension Control Arm Bolts at the Rear Wheel Hub Bracket (GNC) 150 N.m + 30 degrees 111 lb ft + 30 degrees
Rear Suspension Control Arm Bolts at the Frame (GNC) 150 N.m + 30 degrees 111 lb ft + 30 degrees
Rear Suspension Link Upper to Lower Control Arm Bolts (GNE) 150 N.m + 60 degrees 111 lb ft + 60 degrees
Rear Suspension Lower Control Arm Nut at the Frame (GNC) 90 N.m + 120 degrees 51 lb ft + 120 degrees
Rear Suspension Lower Control Arm Bolt at the Rear Wheel Hub Bracket (GNC) 70 N.m + 90 degrees 52 lb ft + 90 degrees
Rear Suspension Lower Control Arm Nut at the Rear Wheel Hub Bracket (GNE) 150 N.m + 60 degrees 111 lb ft + 60 degrees
Rear Suspension Lower Control Arm Nut at the Frame (GNE) 150 N.m + 90 degrees 111 lb ft + 90 degrees
Rear Wheel Bearing and Hub Bolts (GNC/GNE) 100 N.m + 75 degrees 74 lb ft + 75 degrees
Shock Absorber Lower Bolt (GNE) 150 N.m + 60 degrees 111 lb ft + 60 degrees
Shock Absorber Upper at the Frame Bolts (GNC) 100 N.m 74 lb ft
Shock Absorber Upper at the Frame Bolts (GNE) 100 N.m 74 lb ft
Stabilizer Shaft Insulator Bolts (GNC/GNE) 22 N.m + 30 degrees 16 lb ft + 30 degrees
Stabilizer Shaft Link Bolt (GNC) 50 N.m 37 lb ft
Stabilizer Shaft Link Nut (GNC) 50 N.m 37 lb ft
Stabilizer Shaft Link Nuts (GNE) 50 N.m 37 lb ft
Support Bolts (GNC) 90 N.m + 120 degrees 66 lb ft + 120 degrees
Support Bolts (GNE) 90 N.m + 180 degrees 66 lb ft + 180 degrees