Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Controls And Fuel - 2.2L - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Throttle Body
    GM1623767Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the throttle body bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying Engine Harness Electrical Connectors
    GM1647528Courtesy of GENERAL MOTORS CORP.
  3. Connect the TAC electrical connector (1).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
scientia non olet · About Mike's Workshop Manuals