Rear Differential Clutch Control Module Replacement
WARNING: This page is about a different car, the 2010 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedures: Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle |
|
| 1 | Protective Cover |
| 2 | Differential Clutch Control Module Bolts (Qty: 2)
WARNING:
The hydraulic pressure in the differential clutch is very high. To prevent personal injury, wait for at least 10 minutes before removing any parts from the differential clutch.
CAUTION:
Refer to Fastener Caution
. Tip: Leave the bolts in the control module and remove them with the control module. Tighten: 6 N.m (53 lb in) |
| 3 | Rear Differential Clutch Control Module and Seal Procedure: Disconnect the electrical connector. Tip: Do not separate control module and valve |