Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2011 >> Regal CXL Turbo, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement (LDK) >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Feed Pipe Fasteners
    GM2019536Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the 2 fasteners (1) to the intake manifold but do not tighten yet.
  2. Install the fastener (2) to the fuel pump module and tighten to 30 N.m (22 lb ft) with GE-6600-207:  installer and GE-611:  wrench.
  3. Tighten the 2 fasteners (1) to 7 N.m (62 lb in).
  4. Install the fuel feed pipe plastic to the fuel feed pipe metal.
scientia non olet · About Mike's Workshop Manuals