Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2011 >> LaCrosse CXS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement (V6) >> Installation Procedure

Installation Procedure

    Fig 1: Battery Current Sensor
    GM2202162Courtesy of GENERAL MOTORS CORP.
  1. Slide the NEW battery current sensor (2) up onto the battery cable (1).
  2. Attach the sensor to the battery current sensor bracket (3).
    3. Fig 2: Body Harness Electrical Connector & Negative Battery Cable Frame Ground Ring Terminal Nut
    GM2195939Courtesy of GENERAL MOTORS CORP.
  3. Install the negative battery cable frame ground and tighten nut (3) to 25 N.m (18 lb ft).
  4. Connect the body harness electrical connector (2) to the battery current sensor.
scientia non olet · About Mike's Workshop Manuals