Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2010 >> LaCrosse CXS >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC B0000 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition ON, verify that DTC C0035, C0040, C0045, or C0050 is not present in the EBCM.
  2. Replace the K17 Electronic Brake Control Module (EBCM) and verify the DTC does not reset.
    • If the DTC resets, replace the module that set the DTC.