Circuit/System Verification

Verify that DTC B2545 is not present.
- If DTC is present, refer to DTC B2545 .
Inspect the rearview camera and verify there are no debris on the lens and that the bezel or bezel seal is not damaged.
- If debris are found on the lens, clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
Ignition ON, vehicle in PARK, verify the backup lamps are off.
- If the backup lamps are illuminated, refer to Backup Lamps Malfunction .
Vehicle in REVERSE, verify the backup lamps are on.
- If the backup lamps are not illuminated, refer to Backup Lamps Malfunction .
Engine running, transmission in REVERSE, verify a clear rear vision image is displayed on the radio.
- If a clear image is not displayed, refer to Circuit/System Testing.