Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2009 >> Lucerne CX, 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.9L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (NU6) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Tank Wiring Harness Electrical Connector
    GM1755107Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor and seal assembly (1).
  2. Connect the fuel tank wiring harness electrical connector (2) to the fuel tank pressure sensor.
  3. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals