Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2008 >> Allure CX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.8L - DTC P2119 To DTC P2444 & DTC U0107 >> DTC P2440 >> Circuit/System Testing

Circuit/System Testing

  1. Disconnect the solenoid valve.
  2. Ignition ON, observe that a test lamp installed between the solenoid voltage supply and the solenoid control circuit terminals is not illuminated.
    • If the test lamp is illuminated, test for a short to voltage on the solenoid voltage supply circuit. If the circuit tests normal, test or replace the relay.
  3. Inspect the AIR pump inlet and outlet hoses/pipes for restrictions.
  4. Inspect the solenoid valve for leaks.
    • If the solenoid valve inspects OK, replace the AIR pump.
scientia non olet · About Mike's Workshop Manuals