Installation Procedure

WARNING: This page is about a different car, the 2006 Isuzu Ascender, 2006 GMC Envoy XL, 2006 GMC Envoy, 2006 Chevrolet TrailBlazer, and 2006 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Traction Control Switch (Oldsmobile, Buick)

Courtesy of GENERAL MOTORS CORP.

Install the switch (1) to the trim plate.

Fig 2: Removing/Installing Traction Control Switch Retaining Ring (Oldsmobile, Buick)

Courtesy of GENERAL MOTORS CORP.

Install the retaining ring to the switch, ensuring the ring tabs are fully seated.

Fig 3: Traction Control Switch Electrical Connector (Oldsmobile, Buick)

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (1) to the switch.
Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Buick) in Instrument Panel, Gages, and Console.