Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Installation Procedure

Installation Procedure

IMPORTANT: Clean any existing oxidation from the contact face of the battery and battery cable using a wire brush prior to installing the battery cable to the battery.
    Fig 1: Locating Battery
    GM1669904Courtesy of GENERAL MOTORS CORP.
  1. Position the negative battery cable (1) to the battery.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the negative battery cable bolt (2).

    Tighten:  Tighten the bolt to 17 N.m (13 lb ft).

  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
scientia non olet · About Mike's Workshop Manuals