Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement (3.6L) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:
    • Ensure that the face of the pulley hub is flush with the end of the pump shaft.
    • Do not use the arbor press to install the pulley.
  1. Use Mac® Tools Power Steering Pump Pulley Service Kit or equivalent, to install the power steering pump pulley.
  2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement (3.8L)  or Power Steering Pump Replacement (3.6L) .
scientia non olet · About Mike's Workshop Manuals