Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Splash Shield Replacement - Engine >> Installation Procedure

Installation Procedure

    Fig 1: Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield to the lower flange of the engine compartment side rail.
  2. Route the ABS lead through the slot in the engine splash shield.
    3. Fig 2: Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  3. Align the holes in the engine splash shield to holes in the outboard side engine compartment side rail.
  4. Install the push-in retainers to the engine splash shield.
scientia non olet · About Mike's Workshop Manuals