Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2006 >> Rainier 4.2 S, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Digital Radio Receiver Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock® and "XM Theftlock®" will display.
  1. Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
    2. Fig 1: Identifying Module Mounting
    GM1237407Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1) from the receiver.
    3. Fig 2: View Of Connector
    GM1237408Courtesy of GENERAL MOTORS CORP.
  3. Remove the antenna electrical connector (1) from the receiver.
    4. Fig 3: View Of Insulator Panel & Retaining Nuts
    GM1236121Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts retaining the receiver to the insulator panel.
  5. Remove the receiver from the vehicle.
scientia non olet · About Mike's Workshop Manuals