Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2006 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Camshaft Position Sensor
    GM153587Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the camshaft position sensor and bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    2. Fig 2: Identifying Camshaft Position (CMP) Sensor Connector
    GM1686625Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine harness electrical connector (3) to the CMP sensor.
scientia non olet · About Mike's Workshop Manuals