Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2006 >> Lucerne CX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
    2. Fig 1: Identifying Accelerator Pedal Position (APP) Sensor
    GM1671027Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the body harness electrical connector (1) from the accelerator pedal position (APP) sensor.
    3. Fig 2: Identifying Accelerated Pedal Nuts
    GM1671028Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerator pedal nuts.
  4. Remove the accelerator pedal.
scientia non olet · About Mike's Workshop Manuals