Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Converter Covers
    GM161131Courtesy of GENERAL MOTORS CORP.
  1. Install the converter covers.
  2. Install the converter cover attaching bolts.

    Tighten:  Tighten the bolts to 13 N.m (115 lb in).

  3. Install the transaxle cooler line clip to the transaxle.
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals