Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of EBCM/BPMV Assembly
    GM458866Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the left front wheelhouse extension. Refer to Fascia Extension Replacement - Front in Bumpers.
    4. IMPORTANT: The area around the electronic brake control module (EBCM)/brake pressure modulator (BPMV) must be free from loose dirt to prevent contamination of disassembled ABS components.
  4. Thoroughly wash all contaminants from around the EBCM/BPMV.
  5. Remove the 2 BPMV bracket nuts (2).
    6. Fig 2: Removing/Installing BPMV Bracket
    GM458872Courtesy of GENERAL MOTORS CORP.
  6. Remove the 3 BPMV bracket to frame bolts (2).
  7. Remove the BPMV bracket (1) from the frame (3).
scientia non olet · About Mike's Workshop Manuals