Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal and 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Inside Air Temperature Sensor
    GM176925Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the air temperature sensor is sealed to the instrument panel cluster trim plate in order prevent sampling the air behind the dash.
  1. Connect the air temperature sensor to the aspirator hose.
  2. Connect the electrical connector for the sensor.
  3. Install the IPC trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
scientia non olet · About Mike's Workshop Manuals