Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls 3.8L (Introduction, Service & Replacement)) >> Repair Instructions >> Throttle Body Air Inlet Screen Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Throttle Body Air Inlet Screen
    GM180140Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body air inlet screen (2).
  2. Install the snap ring (3).
  3. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .