Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls 3.1L (Introduction, Service & Replacement)) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  2. Disconnect the throttle position (TP) sensor electrical connector.
    3. Fig 1: View Of TP Sensor Screws
    GM201482Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 TP sensor screws.
    4. Fig 2: View Of TP Sensor
    GM201473Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor and the O-ring.
scientia non olet · About Mike's Workshop Manuals