Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls 3.1L (Introduction, Service & Replacement)) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Spark Plug Wire Location On Ignition Coils
    GM162818Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires to the engine.
  2. Install the spark plug wires to the ignition coils.
  3. Fig 2: View Of Spark Plug Wires To Spark Plugs
    GM211485Courtesy of GENERAL MOTORS CORP.
  4. Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
  5. Install the spark plug wires to the retaining clip.
  6. Fig 3: Identifying Spark Plug Wire Routing
    GM211481Courtesy of GENERAL MOTORS CORP.
  7. Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
  8. Install the spark plug wires to the retaining clips.