Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls 3.1L (Introduction, Service & Replacement)) >> Repair Instructions >> Fuel Strainer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Always maintain cleanliness when servicing fuel system components.
    Fig 1: Identifying Fuel Sender Assembly
    GM50611Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Note strainer (3) position for future reference.
    3. Fig 2: View Of Strainer Ferrule
    GM54511Courtesy of GENERAL MOTORS CORP.
  3. Use a screwdriver to pry the strainer ferrule off the reservoir.
  4. Discard the strainer.
scientia non olet · About Mike's Workshop Manuals