Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Century Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Pipe Routing
    GM189079Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel hose/pipe bundle. Refer to Fuel Hose/Pipes Replacement - Filter to Engine .
  2. Remove the EVAP purge pipe from the fuel bundle.
scientia non olet · About Mike's Workshop Manuals