Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2005 >> Allure CXS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Wipers System And Washers System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new washer pump grommet into the container.
  2. Lubricate the washer pump pickup with clean washer solvent.
    3. Fig 1: Identifying Washer Pump
    GM869089Courtesy of GENERAL MOTORS CORP.
  3. Install the washer pump in the washer solvent container - gentle pressure is required.
    4. Fig 2: Washer Solvent Level Sensor Electrical Connector
    GM1453811Courtesy of GENERAL MOTORS CORP.
  4. Install the washer solvent container. Refer to Washer Solvent Container Replacement .
scientia non olet · About Mike's Workshop Manuals