Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2004 >> Rendezvous Ultra >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 3.4L - Introduction - Service & Replacement) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Accelerator Pedal Assembly
    GM50412Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
  2. Disconnect the accelerator cable from the accelerator pedal.
  3. Remove the fasteners holding the accelerator pedal to the bulk head.
  4. Remove the accelerator pedal.