Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2004 >> Park Avenue Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Power Door Lock Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
    2. Fig 1: Removing/Installing Power Door Lock Switch
    GM539832Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector.
  3. Spread the locking tabs (1) at the top and bottom of the switch plate (2).
  4. Lift the switch out in order to remove.
scientia non olet · About Mike's Workshop Manuals