Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

    Fig 1: View of Negative Battery Cable & Battery
    GM450541Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Connect the negative battery cable to the battery.

    Tighten:  Tighten the negative battery cable bolt to 15 N.m (11 lb ft).

  2. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
scientia non olet · About Mike's Workshop Manuals