Removal Procedure

Fig 1: Removal of Switch Plate with Flat Bladed Tool

Courtesy of GENERAL MOTORS CORP.

Insert a flat bladed tool under the front edge of the switch plate (2).
Gently pry upwards in order to release the front edge of the switch plate (2) from the door trim panel (1).
Slide the switch plate forward in order to release the rear retainer tabs.
Disconnect the electrical connectors.

Fig 2: Removal of Switchpack and Switch Plate with Small Flat Bladed Tool

Courtesy of GENERAL MOTORS CORP.

Remove the switchpack (2) from the switch plate (1) by releasing the retainer tabs with a small flat bladed tool.