Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Heated Seat Switch Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the heated seat switch in the switch assembly.
    Fig 1: Heated Seat Switch Assembly & Electrical Connectors
    GM629741Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the appropriate heated seat switch:
    • The natural connector to the driver switch
    • The black connector to the passenger switch
  3. Align the switch assembly to the console trim plate and snap the assembly into position to secure.
scientia non olet · About Mike's Workshop Manuals