Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2003 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1318 (Wiper System And Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Windshield Coupler Clips, Rain Sensor Module, & Electrical Connector
    GM746991Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the rain sensor module.
  2. Install the rain sensor module in the windshield coupler.
  3. Fasten the windshield coupler clips.
    4. Fig 2: View of Trim Cover of Rain Sensor Module
    GM746989Courtesy of GENERAL MOTORS CORP.
  4. Install the trim cover on the rain sensor module.
scientia non olet · About Mike's Workshop Manuals