Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Bracket Replacement - Child Seat Belt Restraint System >> Installation Procedure

Installation Procedure

  1. Position the bracket in the vehicle.
  2. Apply a thread sealant, GM P/N USA 12345382 Canada 10953489, Loctite 242, Permatex 24200 to the threads of the bolts (2) and also the stud for the bracket nut (1).
  3. Install the bolts (2) to each end of the bracket.

    Tighten 

    Tighten the child seat latch bracket bolts to 42 N.m (31 lb ft).

  4. Install the bracket nut (1) between the center seat belts.

    Tighten 

    Tighten the child seat latch bracket nut to 42 N.m (31 lb ft).

  5. Install the rear center seat belts. Refer to SEAT BELT REPLACEMENT - CENTER REAR   .
  6. Install the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (NON-FOLDING)  or  SEAT BACK REPLACEMENT - REAR (FOLDING)  in Seats.
    Fig 1: Installing Bracket Nut Between Center Seat Belts
    G03383884Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals