Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2002 >> Park Avenue Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - On Vehicle >> Installation Procedure

Installation Procedure

  1. Install the power steering flow control spring (2) to the power steering pump.
  2. Install the power steering flow control valve assembly (3) to the power steering pump. Tighten the power steering flow control valve assembly (5) to 75 N.m (55 lb ft).
  3. Install the power steering pressure hose to the power steering pump. Tighten the power steering pressure hose to 27 N.m (20 lb ft).
  4. Lower the vehicle.
  5. Bleed the power steering system. Refer to Bleeding Power Steering System .
scientia non olet · About Mike's Workshop Manuals