Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitor Reset Procedure >> Using a Scan Tool

Using a Scan Tool

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust all tire pressures to the recommended kPa/psi. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication, or to Label - Vehicle Certification, Tire Place Card, Anti-Theft and Service Parts ID in General Information.
  2. Turn ON the ignition, with the engine OFF.
  3. Select Special Functions with the scan tool.
  4. Select Tire Pressure Reset.
  5. Press the Reset soft key. The TIRE PRESSURE NORMAL message should be displayed on the DIC.
  6. Clear the TPM DTC with the scan tool.
scientia non olet · About Mike's Workshop Manuals