Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Washer Solvent Container

Courtesy of GENERAL MOTORS CORP.

Drain the washer solvent container.
Remove the right front fascia extension. Refer to Fascia Extension Replacement - Front in Bumpers.
Disconnect the electrical connector from the washer solvent level sensor.

Fig 2: View of Water Solvent Level Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the washer solvent level sensor from the washer solvent container.