Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 in SIR.
  2. Remove the fasteners securing the seat cushion to the adjuster track. Refer to Seat Cushion Replacement - Front .
  3. Lift the front of the seat cushion up in order to gain access to the memory seat module.
    4. Fig 1: View of Memory Seat Module
    GM295290Courtesy of GENERAL MOTORS CORP.
    NOTE: Note the correct routing of the electrical wiring. Failure to reinstall the wiring properly could result in damage to the wiring.
  4. Disconnect the electrical connectors from the memory seat module.
  5. Remove the fasteners securing the memory seat module to the seat cushion frame.
  6. Remove the memory seat module from the bottom of the seat cushion.
scientia non olet · About Mike's Workshop Manuals