Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Cruise Control Cable & Throttle Body Fuel Injection Cam

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Note the cable routing for replacement.

Disconnect the cruise control cable from the throttle body fuel injection cam (4).
Disconnect the cruise control cable from the throttle body bracket.

Fig 2: Twisting Cruise Control Cable Housing

Courtesy of GENERAL MOTORS CORP.

Twist the cruise control cable housing counterclockwise in order to release the cable housing from the module.

Fig 3: View of Cruise Control Cable Ball Stud & Actuator Strip

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise control cable ball stud (1) from the actuator strip (2) on the cruise control module.

Fig 4: View of Cruise Control Cable & Throttle Body Fuel Injection Cam

Courtesy of GENERAL MOTORS CORP.

Remove the cable from the retainers (2).