Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 2000 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Stationary Window System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS .
  2. Install the windshield garnish moldings (1). Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR in Interior Trim.
  3. Install the rain sensor. Refer to WINDSHIELD OUTSIDE MOISTURE SENSOR REPLACEMENT in Wipers/Washer Systems.
  4. Install the rearview mirror. Refer to REARVIEW MIRROR REPLACEMENT (DD7)  or REARVIEW MIRROR REPLACEMENT (UE1)  .
  5. Install the air inlet grille. Refer to AIR INLET GRILLE PANEL REPLACEMENT in Body Front End.
  6. Install the windshield wipers arms. Refer to WIPER ARM REPLACEMENT in Wipers/Washer Systems.
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the hood.
scientia non olet · About Mike's Workshop Manuals