Entire Seat Will Not Go Forward Or Back; Up Or Down Functions

Operate Normally

1) Using test light, backprobe between forward/back motor connector terminal "A" (Tan wire) and ground. Move power seat switch lever to forward position. If test light glows, go to next step. If test light does not glow, check for poor connection or open in Tan wire between power seat switch and forward/back motor. If circuit is okay, replace power seat switch.

2) Backprobe between forward/back motor connector terminal "B" (Light Green wire) and ground. Move power seat switch lever to back position. If test light glows, go to next step. If test light does not glow, check for poor connection or open in Light Green wire between power seat switch and forward/back motor. If circuit is okay, replace power seat switch.

3) Backprobe between forward/back motor connector terminals "A" (Tan wire) and "B" (Light Green wire). Move power seat switch lever to forward, then back position. If test light glows in both positions, check for poor connections at forward/back motor. If connections are okay, replace forward/back motor. If test light does not glow at both positions, replace power seat switch.