Preliminary Checks

WARNING: This page is about a different car, the 1994 Cadillac Fleetwood. However, it is still accessible from the selected car via links, so may be relevant.

Verify the on-car diagnostics are working by performing DIAGNOSTIC CIRCUIT CHECK chart in BASIC TESTING article in the ENGINE PERFORMANCE section.
Ensure the ECM/PCM and Malfunction Indicator Light (MIL) are functioning properly.
Ensure there are no trouble codes stored, or only intermittent codes are present.
Ensure the fuel control system is operating properly. See BASIC TESTING article in the ENGINE PERFORMANCE section.
Perform fuel system pressure test in BASIC TESTING article in the ENGINE PERFORMANCE section.
Perform a careful visual inspection of all systems.

After all checks have been performed, verify customer complaint and locate correct symptom. Check items indicated under that symptom. Not all items listed under each symptom apply to all models and systems. These procedures will normally recommend testing of a system or component on vehicle, such as EGR, EST, TCC, etc. See SYSTEM/COMPONENT TESTS article in the ENGINE PERFORMANCE section for test procedures.

NOTE: If ECM/PCM displays data but engine fails to start, proceed to NO START - ENGINE CRANKS OKAY in BASIC TESTING article in the ENGINE PERFORMANCE section.