Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 1994 >> Roadmaster Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Controls - System/Component Tests - 6.5L Diesel) >> Fuel System >> Injectors >> Leakage Test

Leakage Test

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 1994 GMC Yukon, 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Suburban, and 1994 GMC Rally Camper Special. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open tester shutoff valve 3/4 to 1 3/4 turns from closed position. Blow dry injector nozzle tip. Slowly depress tester lever until pressure gauge reads 1400 psi (98 kg/cm2 ). Maintain pressure for 10 seconds and observe injector nozzle tip.
  2. A drop may form on end of injector nozzle, but should not fall off within a 10 second period. Replace injector nozzle if a drop of test fluid falls from tip during 10 second period. See Fig 1. Release tester pressure.
Fig 1: Injection Nozzle Leakage Test
G90A15743Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals