Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 1992 >> Roadmaster Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Wheel Alignment Specifications & Procedures (RWD)) >> Adjustments >> Toe-In Adjustment (Front)

Toe-In Adjustment (Front)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1992 Cadillac Brougham, 1991 Cadillac Brougham, 1990 Cadillac Brougham, 1989 Cadillac Brougham, and 1988 Cadillac Brougham. However, it is still accessible from the selected car via links, so may be relevant.

Loosen tie rod end adjusting sleeve clamp bolts. Turn center adjuster sleeve to adjust toe-in. See Fig 1 . Ensure bolts are at bottom of tie rod and bolt head is facing forward. Tighten tie rod end adjuster sleeve clamp bolts.

Fig 1: Adjusting Front Toe-In
G110027Courtesy of GENERAL MOTORS. CORP.
scientia non olet · About Mike's Workshop Manuals