Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 1987 >> LeSabre Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Wheel Alignment Specifications & Procedures) >> Adjustments >> Camber Adjustment

Camber Adjustment

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1988 Oldsmobile Toronado, 1988 Cadillac Eldorado, 1988 Buick Riviera, 1988 Buick Reatta, and 1987 Oldsmobile Toronado. However, it is still accessible from the selected car via links, so may be relevant.

To adjust camber, loosen 2 strut-to-steering knuckle bolts. Tighten or loosen camber adjusting bolt, located above spindle next to upper strut-to-steering knuckle bolt, to obtain correct camber. While holding wheel in position, tighten 2 strut-to-steering knuckle bolts.

scientia non olet · About Mike's Workshop Manuals