Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Buick >> 1979 >> Skyhawk Base, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Auto. A/C Systems - Automatic Climate Control >> Component Replacement >> Programmer >> Exc. Riviera >> Removal

Exc. Riviera: Removal

  1. Disconnect battery ground cable. On Electro and LeSabre, remove glove box and right-hand hush panel. On Century and Regal, open glove box and drop door by releasing side tabs.
  2. Disconnect temperature door link threaded rod at the programmer.
  3. Remove vacuum and electrical connectors. Remove hose and adapter from programmer.
  4. Remove programmer retaining screws and remove programmer.
scientia non olet · About Mike's Workshop Manuals