Engine Assembly -- Repair (G14, G15, & G16)

• 11 00 Engine Assembly
  • Handling components after flood damage (all 8' series models 2019-2023)
  • Engine oil consumption measurement
  • Overview of consumables (all 8' series models 2019-2023)
  • 11 00 039 Check compression of all cylinders (840i and 840i xDrive coupe/convertible/Gran Coupe sedan)
    • Check compression of a cylinders
  • 11 00 300 Motor oil consumption measurement (all 8' series models 2019-2023)
  • 11 00 598 Remove and install the engine on the front axle (840i coupe/convertible/Gran Coupe sedan)
    • Removing the engine from the front subframe
    • Attaching the engine on the front subframe
  • 11 00 670 Securing engine in installation position (840i coupe/convertible/Gran Coupe sedan)
    • Move the engine to the installation position
    • Take engine out of installation orientation
  • 11 00 682 Checking all cylinders for loss of pressure (after vehicle diagnosis) (840i and 840i xDrive coupe/convertible/Gran Coupe sedan)
    • Checking all cylinders for loss of pressure
  • 11 00 895 Commissioning the oil circuit (840i and 840i xDrive coupe/convertible/Gran Coupe sedan)
  • Engine identification (all 8' series models 2019-2023)
  • 11 00 598 Remove and install the engine on the front axle (840i xDrive coupe/convertible/Gran Coupe sedan)
    • Removing the engine from the front subframe
    • Attaching the engine on the front subframe
  • 11 00 670 Securing engine in installation position (840i xDrive coupe/convertible/Gran Coupe sedan)
    • Move the engine to the installation position
    • Take engine out of installation orientation
  • 11 00 039 Check compression of all cylinders (M850i xDrive coupe/convertible/Gran Coupe sedan)
    • Check compression of all cylinders
  • 11 00 598 Remove and install the engine on the front axle (M850i xDrive coupe/convertible/Gran Coupe sedan)
    • Removing the engine from the lifting table
    • Mounting the engine to the engine support bracket
    • Removing the engine from the engine support bracket
    • Attaching the engine to the lifting table
    • Repair notes for cylinder head or engine replacement
  • 11 00 670 Securing engine in installation position (M850i xDrive coupe/convertible/Gran Coupe sedan)
    • Install the engine bridge
    • Remove engine bridge
  • 11 00 902 Commissioning of the oil circuit and cooling system bleeding (M850i xDrive coupe/convertible/Gran Coupe sedan)