61 13... Removing and installing/replacing fibre-optic cable connector

WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Comply with notes and instructions on HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

E70:
Remove side section on rear seat backrest on left.
E70 (with 3rd seat row)/E71:
Remove TRIM ON C-PILLAR AT BOTTOM LEFT .

Slacken nut (2).

Feed fibre optic cable (1) out of holder (3).

Unlock catch on fibre-optic cable connector (4) with a suitable tool (5).

Remove fibre-optic cable connector (4) in direction of arrow from bracket (3).

Fig 1: Removing Fibre-Optic Cable Connector From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise cover cap (1) with a suitable tool and remove from fibre-optic cable connector (2).

Fig 2: Removing Cover Cap From Fibre-Optic Cable Connector Using Suitable Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise lock (1) and pull fibre-optic cable (2) out of fibre-optic cable connector (3).

Installation:

Make sure fibre-optic cable (2) is correctly seated and engaged in fibre-optic cable connector (3).

Fig 3: Identifying Fibre-Optic Cable, Connector And Lock

Courtesy of BMW OF NORTH AMERICA, INC.