61 13... Circular connector, 13-pin, system D2.5

Special tools required: 

• 61 0 303

Pull off rubber grommet (1).

Carefully pull out lock (2) in direction of arrow.

Fig 1: Pulling Out Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Move lower section of connector (3) in direction of arrow until retaining lugs (4) snap into release groove (5).

Fig 2: Snapping Retaining Lugs Into Release Groove

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 , press down retaining lugs (6) of corresponding contact and pull out cable.

Fig 3: Pressing Down Retaining Lugs And Pulling Out Cable

Courtesy of BMW OF NORTH AMERICA, INC.