Compatibility Check For USB Devices

Systems concerned: ULF-SBX-H, CBX-MEDIA for all vehicles

Diagnosis is only possible for systems approved by BMW.  

Procedure for compatibility check of the present USB device 

1. Compile USB device data:
   • Designation of USB device
   • If applicable, software version of the USB device
2. Compile control-unit data:
   • Control unit software version (BMW part number)
3. Use the USB device data to determine whether the present USB device is approved by BMW for this vehicle.
   NOTE: The diagnostic ranges offered on the Integrated Service Information Display apply to recommended USB devices.