Mike's Workshop Manuals: Service manuals for every vehicle
Home >> BMW >> 2017 >> 328d >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (General Electrical System - Repair - E93) >> Plug Connection, Terminal, Power Distribution Box >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... Inline connectors, 15-pin, System D2.5

61 13... Inline connectors, 15-pin, System D2.5

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 335is, 2013 BMW 335i, 2012 BMW 335is, 2012 BMW 335i, and 2011 BMW 335is. However, it is still accessible from the selected car via links, so may be relevant.

Carefully pull external connector (1) in area of retaining lugs (2) apart slightly.

Fig 1: Pulling Apart External Connector
G08509669Courtesy of BMW OF NORTH AMERICA, INC.

Pull internal connector (3) until limit position in direction of arrow.

Fig 2: Pulling Internal Connector To Limit Position
G08509670Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press back retaining hook (4) of corresponding contact and pull out cable with contact.

Fig 3: Pressing Back Retaining Hook And Pulling Out Wire With Contact
G08509671Courtesy of BMW OF NORTH AMERICA, INC.